Semi-fast mortar Fassa Gaper 3.30 thixotropic, fibre-reinforced, extra-white and grey, for interiors and exteriors.
USE
GAPER 3.30 is used for smoothing and smoothing non-planar surfaces indoors and outdoors, horizontally and vertically, with thicknesses from 3 to 30 mm. It is also suitable for restoring steps, depressions and holes in screeds. In a short time the supports will be suitable for installing ceramic, stone material or waterproofing sheaths (such as AQUAZIP GE 97 etc.).
PROCESSING
Mix GAPER 3.30 gray with 21-23% clean water (add 5.3-5.7 liters to each 25 kg bag); GAPER 3.30 white should instead be mixed with 23-25% clean water (add 5.8-6.2 liters to each 25 kg bag).
Mix the mortar by hand or with a mechanical stirrer for no more than 3 minutes; smooth the surface with a metal spatula, then spread the mixture until the desired thickness is obtained (maximum 30 mm). For applications exceeding 30 mm it is necessary to wait for the product of the previous coats to harden completely. In the case of pronounced discontinuities in the surface (presence of joints or strong differences in thickness) or in the presence of supports with a high
possibility of dimensional variations due to thermal or hygrometric effects, insert an alkali-resistant glass fiber mesh such as FASSANET 160 inside the first coat.
For applications on poorly absorbent substrates we recommend mixing GAPER 3.30 with AG 15 latex in a 1:3 ratio (one part latex and three parts water) to improve the adhesion characteristics of the product .