The
Fischer Chemical Anchor FIS C 700 HP PRO.1, in 410 ml coaxial format, hybrid bi-component injection.
Resin and hardener are in two separate containers and are not mixed or activated until extrusion occurs through the mixer.
- Before carrying out the installation, clean the hole according to the instructions given.
- Extrude the resin starting from the bottom of the hole, taking care not to leave any air bubbles.
- Insert the bar manually by rotating it until it reaches the base of the hole.
- The resin adheres to the entire surface of the anchor bar and the surface of the hole, sealing it.
- The two cartridges are quick and easy to use with fischer pistols.
- Partially used cartridges can be reused simply by replacing the mixer.
FIS C 700 HP PRO.1 is certified for applications on walls made with solid or semi-solid brick, clay or calcium silicate. It is also a perfect chemical anchor for building applications in hollow or lightweight concrete blocks or in cracked and non-cracked concrete from class C20/25 to C50/60. FIS C 700 HP PRO.1 is certified for the use of grip bars with a diameter of 10 to 20 mm for the fixing of metal and wooden constructions, for facades, stairs, awnings, canopies and many other construction applications. daily use.
Its performance has been tested by EOTA, the European Organization for Technical Approval, which has certified a minimum useful life of the product of 50 years, while maintaining its characteristics unchanged techniques.
Compared to most resins on the market, FIS C 700 HP PRO.1 boasts enormous flexibility in construction applications, with the possibility of being used without loss of resistance, from -40°C to 120°C with therefore certified performance at both high and low temperatures.
INSTRUCTIONS FOR USE
- FIS C700 HP PRO.1 and T-BOND PRO.1 are hybrid two-component chemical injection anchors.
- Resin and hardener are in two separate containers and are not mixed or activated until extrusion through the mixer occurs.
- Before carrying out the installation, clean the hole according to the instructions given.
- Extrude the resin starting from the bottom of the hole, taking care not to leave any air bubbles.
- Insert the bar manually by rotating it until it reaches the base of the hole.
- The resin adheres to the entire surface of the anchor bar and the surface of the hole, sealing it.
- The two cartridges are easy and quick to use with fischer pistols.
- Partially used cartridges can be reused simply by replacing the mixer.
TECHNICAL DATA
- Storage 15 months
- Contents 410 ml
- Scale unit 180