The
Fischer SAR BI acrylic sealant in water dispersion for internal plastered walls with a rough effect
- CE marked for sealing facades, internal side.
- The grainy structure is ideal for rough surfaces and ensures a rough plaster-like appearance.
- The acrylic sealant in water dispersion is odorless and therefore ideal for use in closed environments. It contains no solvents and is not corrosive.
- Good resistance to chemical agents and UV rays. In conditions of extreme irradiation it could change color.
- Resistant to water washout (not stagnant) and moisture after hardening.
- The product is paintable. Perform a preliminary test to evaluate the covering capacity of the specific paint.
INSTRUCTIONS FOR USE
- Remove dirt, dust, oil and rust from surfaces. Sand or sandblast porous surfaces.
- Cut the extrusion end, apply the nozzle to the cartridge, cut the tip to adapt it to the dimensions of the joint and insert into a fischer silicone dispenser KP"¯M"¯2"¯PLUS or KP"¯M"¯2 .
- Apply the adhesive tape to the edges of the joint and then the product along it. Level with a spatula.
- Remove the tape from the edges of the joint.
- Clean the work tools and the unhardened product with water. The hardened product can only be removed mechanically.
- Not suitable for applications with continuous immersion in water and in case of imminent rain or frost.
TECHNICAL SPECIFICATIONS
- Storage 12 months
- Contents 310 ML