Deca MIGA 215 multi-process welding system, MIG/MAG, NO-GAS, MMA, TIG 1Ph - 230V 50/60 Hz.Synergic MIG welding "EASY MIG".The MULTIPROCESS inverter welding generators of the MIGA line are versatile, very simple to use but with a welding quality usually found in more sophisticated products. The MIGA line is the right quality/price ratio for those who have to carry out maintenance work, small constructions and workshop work. A reliable and durable product, carefully designed and manufactured at our factories in San Marino.
- The exclusive EASY MIG FULL SETTING interface allows you to weld in Synergic MIG / Manual MIG / WIRE No Gas / MMA / TIG Lift.
- In synergic MIG mode it makes welding of many metals such as: steel, stainless steel, aluminum and brazing with copper silicon or copper aluminum wires simple.
- In MMA mode it allows welding of rutile and basic coated electrodes.
- In TIG Lift mode it is perfect for precision work.
- The MIGA 215 model delivers 150 Amp in direct current. Accommodates 100mm and 200mm diameter wire spools.
The power supply voltage is single phase at 230Volt. It has low energy consumption: it can be used with reduced installed power (3 kW) and connected to a motor generator (see technical data table).
Through the main FULL SETTING command, in addition to selecting the welding process, it is possible to adjust other important parameters to always obtain an excellent result. The main features of the MIGA series are:
- Synergic MIG: extremely simple system adjustment.
- MIG Inductance Adjustment: ("Full Setting" command) it is possible to adjust this value to reduce welding spatter.
- Adjustable MMA Arc Force: ("Full Setting" command) to obtain optimal welding with each electrode it is possible to adjust the temporary increase in current when the electric arc becomes short.
- MMA Automatic Hot Start: facilitates arc striking.
- TIG LIFT: the arc is struck by touching the piece with the electrode and lifting it slowly. The risk of contaminating the workpiece with the tungsten electrode is modest.
- TIG automatic slope up: progressive increase in welding current to obtain an impeccable start of the welding bead.
- TIG Slope down adjustable: ("Full Setting" command) reduction of the welding current to obtain an impeccable end of the welding bead.
TECHNICAL SPECIFICATIONS
- Adjustment range (Amp):
- MIG: 10 - 150A
- MMA: 10 - 130A
- TIG: 10 - 150A
- Amp service 40°C - EN 60974-1 : MIG: (110A - 25%) - (70A - 60%)
- MMA: (100A - 25%) - (60A - 60%)
- TIG: (110A - 25%) - (70A - 60%)
- No-load voltage (Volts): 100V
- Power supply voltage volts (50/60 Hz): 1 Ph - 230V
- Power absorbed 60% / Max: 1.6 / 2.5 kW
- Fuse (Amp): 16A
- Generator: +/- 30% (4 kW)
- Steel wire (Ø mm): Ø 0.6 - 0.8 - 0.9 mm
- Stainless steel wire (Ø mm): Ø 0.8 mm
- Al wire.Mg - Al.Yes (Ø mm): Ø 0.8 - 1.0 mm
- Cu wire.Yes 3 - Cu.Al 8 (Ø mm): Ø 0.8 mm
- Cored wire (steel) (Ø mm): Ø 0.6 - 0.8 - 0.9 - 1.0 mm
- Usable wire spool: Ø 100 - 200 mm
- Rutile: Ø 1.6 - 3.2 mm
- Basic: Ø 1.6 - 3.2 mm
- TIG: Ø 1.0 - 2.4 mm
- Wire feeder: 2 rollers
- Output connections: DX 25 mm2 / Direct torch
- Thermostatic protection: yes
- Weight kg ≅: 9.7
- Dimensions (mm): 452 x 220 x 345
- Manual welding: yes
- Synergistic welding: MIG MAG / NO GAS
- Electronic inductance: MIG/MAG, NO GAS - Adjustable
- Burn back: MIG/MAG, NO GAS
- Hot start: MIG/MAG, NO GAS, MMA
- Arc Force (MMA): Adjustable
- Anti-sticking (MMA/TIG): yes
- Tig Lift (Torch with tap): yes
- Slope Up: TIG
- Slope Down: TIG - Adjustable
SUPPLIED ACCESSORIES
-
MIG torch 110A 2m (wire Ø 1.0 mm Fe)
- rollers (Ø 0.9 mm Flux / Ø 0.6 mm Fe)
- cable with ground terminal
- cored wire coil, gas tube