The flush-to-the-wall doors of the Essential line do not require a trim frame.
The door blends in more and more with the surrounding environment, creating continuity between the walls which become the undisputed protagonists of the space while the door feels completely "fused" with the wall.
A special feature of swing doors is the possibility of giving continuity to the rooms, the door panels can be painted, lacquered or covered with wallpaper exactly like the existing finishes . Furthermore, there is the possibility of finishing the door in two different ways, one for each side, allowing it to adapt to the environment in which it is inserted.
The Tresor doors are offered in matt lacquered and lacquered open pore ash finishes, with 7 standard Ral:
- RAL 9001
- RAL 9002
- RAL 9003
- RAL 9010
- RAL 9016
- RAL 9018
- RAL 1013
- RAL 1015
- BOTTOM
The Essential doors can be installed in both masonry and plasterboard walls and can be made both in the classic rectangular shape and in the particular trapezoidal shape which is well suited to particular environments (for example attics, under stairs ...).
The doors can possibly be prepared, when ordering, for:
- magnetic lock (KEY-PANEL-EUROPEAN CYLINDER)
- roller lock
- for roller lock with hole for tray
- roller lock with recessed handle.
The 105 version of the frame features the aluminum profile with finished wall thickness reference. It is equally suitable for installation on both masonry and plasterboard walls.
Available in the following versions: single door, double door, without upper crosspiece, trapezoidal in shape. The "push or pull" model is available in variants with right or left opening direction, and it is necessary to decide the opening direction beforehand since they are not reversible.
The 105 frames of the Essential swing door require space of 13 cm in width and 6.5 cm in height more than the size of the door.
If you have a finished wall with 90 mm plaster or more and 100/125 mm plasterboard, there is the 90 version.
TECHNICAL CHARACTERISTICS
- Raw aluminum alloy frame with finished wall thickness reference.
- It is supplied assembled using die-cast aluminum brackets and suitably glued stainless steel brackets.
- It is completed with spacers to ensure alignment and squareness.
- Predisposed for housing hinges and lock striker; the holes are appropriately protected with plastic caps.
- Fine mesh fiber mesh, to be applied on the joints during the plastering phase.
N.B.: The push version allows the maximum opening of the door of 90°/100°, with consequent reduction of the passage space.
The swing door is not supplied with hinges, seals and lock kit.
The entire RAL range for GLOSS LACQUERED is available on request with a surcharge.
All products except the "bottom" product are ordered at the express request of the customer therefore it will not bereturn requests are accepted.